The windlass can be divided into manual, electric, hydraulic, steam and so on according to the working mode of the control driver.

The windlass can be divided into 12mm-120mm models according to the diameter of the anchor chain.

Windlass in accordance with the wire rope drum spread and can be developed into one side and two sides of China.

The key of the hoist is composed of the base, the support frame, the sprocket, the brake pedal, the sprocket chain, the transmission device, and the electronic control system (except the manual hoist). 

The electric hoist has a motor, and the hydraulic hoist has a hydraulic oil pump and a hydraulic motor.

Marine hydraulic windlass introduction and characteristics of detailed introduction

The key technical performance analysis index of windlass mainly includes cable diameter, nominal pressure change rate of windlass, rated load, different load, how many speed regulation, electrical system, etc.

The windlass installed on the ship shall ensure that the winding edge of the anchor chain and sprocket chain is 117-120 degrees.

Characteristics of Marine hydraulic windlass

Marine hydraulic windlass is the use of high pressure oil drive motor, and then through the reducer (there is no reducer) to promote the transmission system transmission gear, 

so that the windlass running power device is smooth, smooth work, conducive to maintenance, large tons of ship foundation is hydraulic.